KAC-7406
4/3 Channel power amplifier
DISCONTINUED MODEL
Key Features
| Aluminum die cast heat sink |
| Power MOS-FET switching power supply |
| 800 Watts max Output Power |
| 2Ω Load Capability |
| 4 channel or 2 channel + sub setup |
| Built-in Variable Low-pass filter (50 - 200Hz) |
| Built-in High-pass filter (80Hz: ON/OFF) |
| Signal Sensing Turn-on |
| Speaker level input |
Amplifier Features
| Load Capability | 2Ω Stable |
| Maximum power output | 800W |
| Rated power output (4Ω) | 60W x 4 (4Ω) |
| Rated power output | 60W x 2 + 180W x 1 (4Ω) |
| Bridged power output (4Ω) | 180W x 1 |
| CEA-2006 Compliant | Yes |
| Low-pass Filter | Yes |
| High-pass Fliter | Yes |
| Switched Mode Power supply | Yes, with Power MOS-FET |
| Power Indicator | Yes |
| Signal Sensing Turn-on | Yes |
| Line in | 2 RCA's |
| Speaker level Input | Yes |
| Die-Cast Aluminium Heat Sink | Yes |
Amplifier-Specifications
| Maximum power output (4Ω) | 200W x 4 |
| Rated power output (4Ω, 14,4V) | 60W x 4 (20Hz ~ 20000Hz, 1%THD) |
| Rated power output (2Ω, 14,4V) | 90W x 4 (1000Hz, 1%THD) |
| Rated power output (4Ω, 14,4V) | 60W x 2 + 180W x 1 (1%THD) |
| Rated power output (CEA-2006) | 60Watts RMS x 4 at 4 ohms and 1% THD |
| Low-pass Filter | 50~200Hz (24dB/oct)(B-Channel) |
| High-pass Fliter | 80Hz (-12dB/oct) |
| RCA Input Sensitivity | 0.2 ~ 5V |
| Speaker Level Input Sensitivity | 4 ~ 12V |
| Input Impedance | 10kΩ |
| Signal to Noise Ratio | 100dB |
| Signal to noise ratio (CEA-2006) | 80dBa (Reference: 1 Watt into 4 Ohms) |
| Frequency response (+0dB, -3dB) | 5Hz ~ 50000Hz |
| Operating voltage | 14.4V (11V ～ 16V allowable) |
| Maximum current consumption | 29A |
| Dimensions (WxHxD) | 315 x 56 x 200(mm), |
| Weight | 2.1kg |
| Unit weight in individual package | 2.48 kg. |