Key Features
| High Quality 4-channel Power Amplifier | 
| Single-side Exposure of Terminals for Multi-Installation | 
| Maximum Output Power 800W | 
| Built-in High & Low-pass Filter | 
| Blue Illumination | 
Amplifier Features
| Load Capability | 2Ω Stable | 
| Maximum power output | 800W | 
| Rated power output (4Ω) | 60W x 4 (4Ω) | 
| Rated power output | 90W x 4 (2Ω) | 
| Bridged power output (4Ω) | 180W x 2 | 
| CEA-2006 Compliant | Yes | 
| Low-pass Filter | Yes | 
| High-pass Fliter | Yes | 
| Bass Boost Circuit | Yes | 
| Switched Mode Power supply | Yes, with Power MOS-FET | 
| Power Indicator | Yes | 
| Blue Illumination | Yes | 
| Line in | 2 RCA (Gold Plated) A/B | 
| Input Selector | A/AB | 
| Line out | 1 RCA (Gold Plated) | 
| Speaker level Input | Yes | 
| Single Side Terminals | Yes | 
| Gold Plated Power & Speaker Terminals | Yes | 
| Die-Cast Aluminium Heat Sink | Yes | 
Amplifier-Specifications
| Maximum power output (4Ω) | 200W x 4 | 
| Rated power output (4Ω, 14,4V) | 60W x 4 (20Hz ~ 29000Hz, 0.08%THD) | 
| Rated power output (2Ω, 14,4V) | 90W x 4 (1000Hz, 0.8%THD) | 
| Rated power output (4Ω, 14,4V) | 180W x 2 (1000Hz, 0.8%THD) | 
| Rated power output (CEA-2006) | 60Watts RMS x 4 at 4 ohms and 1% THD | 
| Low-pass Filter | 50~200Hz (18dB/oct)(B-Channel) | 
| High-pass Fliter | 50~200Hz (12dB/oct) | 
| Bass Boost Circuit | 0/ 6dB (B-Channel) | 
| Bass Boost Frequency | 90Hz | 
| RCA Input Sensitivity | 0.2 ~ 5V | 
| Input Impedance | 10kΩ | 
| Signal to Noise Ratio | 100dB | 
| Signal to noise ratio (CEA-2006) | 90dBa (Reference: 1 Watt into 4 Ohms) | 
| Frequency response (+0dB, -3dB) | 5Hz ~ 50000Hz | 
| Operating voltage | 14.4V (11V ~ 16V allowable) | 
| Maximum current consumption | 40A | 
| Dimensions (WxHxD) | 380 x 64 x 286(mm), | 
| Weight | 4.1kg | 


 
							